Transformer Vacuum Oil Filling Oven
|Min. Order (Sets)||FOB Price|
|1+||US $100,000 / Set|
The plant is specially designed for transformer oil filling in vacuum condition.
It is able to evacuate and fill oil in transformer tank. Under vacuum condition, oil filling process can be automatically and manually operated.
With Computer, PLC control.
Vacuum oil filling system
Oil filling process programmed to start filling only after vacuum condition of 0.5 mbar for 0-50 minutes is reached, and to stop when each float switch in transformer has been reached.
Filling should be done from the bottom of transformer tanks, through the tank oil drain.
Customer connect oil pipe to oil storage tank (1200mm× 2100mm) on vacuum chamber.
Total 6 filling lines, connected to chamber walls (not from top of chamber)
Each filling line shall comprise:
Pneumatic valve for oil filling
Float-ball switch to switch off filling process
Connecting hose, filter and manual valve
Chamber equipped with 1 extra flexible hose with tap valve for manually operated oil filling
Chamber quipped with leakage oil collecting vessel connected to float switch:
Float switch to switch off filling process in case of overfill or leakage of transformer tank
Oil filling process can be automatically and manually.
When it is automatic, oil filling amount can be set via pneumatic valve.
One each oil-filling line, equipped a manual valve used for regulating flow rate.
All control of oil filling will be combined in main control cabinet.
All ball valves are stainless.
YANG MING MACHINERY IMPORT&EXPORT Co., Limited
Frank YANG (marketing director)